Lacie gives you its own domain (lacie.com) to remotely access to NAS, so you can access it from outside your network.The NAS sets up remote access by automatically configuring port forwarding.
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid5 sda2 sde2 sdd2 sdc2 sdb2 7805956096 blocks super 1.0 level 5, 512k chunk, algorithm 2 [5/5] [UUUUU] md3 : active raid1 sda5 sde5 sdd5 sdc5 sdb5 255936 blocks [5/5] [UUUUU] md2 : active raid1 sda9 sde9 sdd9 sdc9 sdb9 875456 blocks [5/5] [UUUUU] md1 : active raid1 sda8 sde8 sdd8 sdc8 sdb8 843328 blocks [5/5] [UUUUU] md0 : active raid1 sde7 sdd7 sdc7 sdb7 sda7 16000 blocks [5/5] [UUUUU] I created a custom capsule, a custom firmware which is very easy to do thanks to the provided script. Default passwords for root and partner are unknown AFAIK.
Not much to say, just execute the script and answer to a few questions. Their respective md5crypt hashes are: We can remove partner account by editing /usr/lib/python2.6/site-packages/unicorn/authentication/local/(search partner) and deluser partner or changing Exec Mode in /usr/lib/python2.6/site-packages/exec_mode/exec_mode.py?
On the pc connected to the router I can see the pc with adapter but when I try to open it I get the message "Windows cannot access //xxxxxxx error code: 0x80070035 the network path not found". I have tried to search for a fix in forums, some said reconfigure the firewall, some said change a service setting.
I have tried many things to no avail so if someone can figure this out could they let me know. If the firewall is the problem, you'll have to configure it to allow access to "trusted zone" addresses.
On the network page of my Lacie dashboard I selected configure using DHCP.
The IP config is as follows: IP 192.168.0.6 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1 DNS Server 192.168.0.1 I signed up for an account with Dyn DNS and filled in the example.account details into the Lacie dashboard. My router settings are as follows: First, make sure your device is Internet safe.
So you would have to use example.dyndns.org, you can't add www or anything else on the front.
If you are on a personal connection, like at home, you can run an anti-virus scan on your device to make sure it is not infected with malware.
When I enabled remote access, everything checked out as configured correctly and I did have remote access to the NAS.
However, that access is only to browsing files on the NAS and not for remote management.
Then to flash it, you can use the La Cie Network Assistant or this method which I prefer, less dependent on network operations: Note that if you use La Cie Network Assistant and it fails updating the fw, they tell to disable IPConf support. IP:9091/transmission/web/) Don't forget to change the transmission download path. There is probably a serial port on board giving access to uboot console In case we need to play with new disks, keep in mind their UUID must be injected in th e EEPROM, see here These are the tools provided on the cdrom.