A boot loader is loaded into main memory from persistent memory, such as a hard disk drive or, in some older computers, from a medium such as punched cards, punched tape, or magnetic tape.The boot loader then loads and executes the processes that finalize the boot.A boot loader is a computer program that loads an operating system or some other system software for the computer after completion of the power-on self-tests; it is the loader for the operating system itself.
More detailed configuration documentation is available at some cases, you may want to assign a static IP to your eth OS rig.
It is recommended to assign static IPs based on mac addresses on your router.
Now, I take pride in having never ever lost any data on my Macs since 1998, so I was concerned this might be the end of my record…
In Disk Utility the drive device was listed, but no volume could be mounted due to a corrupted partition map.
I swapped in an older, ridiculously slow Win 8.1 formatted hdd, and my machine works. I'm 100% the newer ssd works, too, so I have no idea why the hdd booted without issue (aside from being sloooooow). This university kid can't afford a new machine or repair service (or food)! I have the same issue, nothing happens on start up Dell precision T7910 updated BIOS and windows 10.
Can somebody please walk me through the steps as I am down business wise because of this issue. In computing, booting (or booting up) is the initialization of a computerized system.The system can be a computer or a computer appliance.It is highly recommended that you use your own remote config.However, if you don't want to use the remote config, you must turn it off.You will then be prompted to enter the recovery key to progress and the system will ask for this on each reboot.